Pengendalian Pembuatan Asphalt Hot Mix Pada Asphalt Mixing Plant Menggunakan PLC

Prasetyo Aziz

Abstract

Asphalt hot mix manufacture consists of mixer and weighing which is a part of the mixing process which is controlled automatically using PLC at the asphalt mixing plant SPECO TSAP-800AS. All processes in the asphalt mixing plant have used computer-based electromechanical automation, especially the application of PLC control on the Mixer and Weighing section, considering that the mixing process must always be stable and run continuously so it must be controlled automatically using a combination of relays and air dampers. The scale sensor used is a load cell which functions to calculate the weight of solid material from hot bin CB1/1 to CB1/5. The mixer used has a capacity of 800 kilogram per batch. The design of controlling the manufacture of asphalt hot mix at the asphalt mixing plant TSAP-800AS was made using Outseal Studio V2.2 software.

Keywords

Ladder diagram; mixer;PLC, Weighing

Full Text:

PDF

References

A. Benesova, M. Hirman, F. Steiner, and J. Tupa. (2018). Analysis Of Education Requirements For Electronics Manufacturing Within Concept Industry 4.0. Proc. Int. Spring Semin. Electron. Technol., vol. 2018-May, pp. 2–6.

G. Liping, (2009). Design Projects In A Programmable Logic Controller (Plc) Course In Electrical Engineering Technology. Technology Interface Journal, Volume 10 No.1, 2009.

Cuoci, Alberto, et al. (2007). Experimental and Modeling Study of NOx Formation in a Turbulent Gasoil Burner. XXX Meeting on Combustion: Italian Section of the Combustion Institute.

A. Risfan, S. Priyambodo, and B. Firman. (2019). Pengendalian Motor Dc Sebagai Penggerak Konveyor Barang Menggunakan Plc Modicon M221 TMCE24r & Hmi Magelis GXU3512”, JE, vol. 5, no. 1, pp. 26–36.

Tasu, Antonio Sorin. (2006). Programmable logic controller. Romanian Journal of Physics 51.1/2, : 305.

L. Luo and B. Liu, (2010, November). Research on PLC-Based Control System for Mixing. International Conference on E-Product E-Service and E-Entertainment (ICEEE) (pp. 1-3), IEEE.

Rostiyanti, Susy Fatena. (2002). Alat Berat Untuk Proyek Konstruksi. Jakarta, Indonesia: Rineka Cipta

Fathurrozi & Gorang, S. I. (2015). Pengendalian Mutu Agregat Kelas A Dan Kelas B Pada Pekerjaan Jalan Sungai Ulin-Mataraman, Jurnal POROS TEKNIK, Volume 7 No. 1: 1-53

Risfendra & Setyawan, H. (2020). Otomasi Industri dengan Arduino Outseal PLC. UNP Press.

R. Risfendra, S. Sukardi, and H. Setyawan. (2020). Uji Kelayakan Penerapan Trainer Programmable Logic Controller Berbasis Outseal Plc Shield Pada Mata Pelajaran Instalasi Motor Listrik, JTEV, Vol 6, no 2 pp 48-53.

Article Metrics

Abstract view: 90 times
Download     : 12   times

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Refbacks

  • There are currently no refbacks.