Pemodelan dan Simulasi Robot Lengan 3 DOF Menggunakan V-REP

Abstract

Movement of objects from one position to another position is usually by conventional method of human strength. Development of robotics technology makes movement of objects in the industry by arm robot system. By using arm robot system,  the work more effective. The aim  of this reaserch is to modeling 3 Degree of Freedom arm robot with kinematics method using V-REP software. Kinematics method is a subject that analyze robot movement without knowing the force that causes the movement. This research use the forward kinematics method so that arm robot can reach the goals. The input from this robot is an angle which is computed using the forward kinematics method. The output is an end-effector coordinate. Based on the result of the research, the 3 Degree of Freedom arm robot is capable to move the object from one position to another position and an error that occurs can achieve  4,99% for x coordinate, 5,57% for y coordinate, and 3,18% for z coordinate. Based on these results, the 3 Degree of Freedom arm robot with the forward kinematics method can be simulated in V-REP software effectively.

Keywords

Arm robot, Degree of freedom, Forward Kinematics

Full Text:

PDF

References

Anggoro, B. (2013). Sejarah dan Perkembangan Robot. Diakses dari Universitas Diponegoro.

Benu, D. (2016). Rancang Bangun Sistem Kendali Lengan Robot 3 Sendi Berbasis Programmable Logic Control (PLC). Tugas Akhir Teknik Elektro, STT Adisutjipto, Yogyakarta.

Budiharto, W. (2014). Robotika Modern – Teori dan Implementasi (edisi revisi). Andi.

Jatmiko, W., dkk. (2012). Robotika Teori dan Aplikasi. Depok: Universitas Indonesia. Fakultas Ilmu Komputer Universitas Indonesia.

Prasetia, I. E., & Agustinah, T. (2015). Invers Kinematics dengan Solusi Closed Form pada Robot Denso Manipulator. Jurnal Teknik ITS, 4(1), 2337-3539.

Rus, D. (2011). Robotic Systems and Science – Forward and Inverse Kinematics. Diakses dari Massachusetts Institute of Technology, http://courses.csail.mit.edu/6.141/

Siswaja, H. D. (2008). Prinsip Kerja dan Klasifikasi Robot. Media Informatika, 7(3).

Sulistyowati, R., & Kurniawan, M. Y. (2012). Kontrol Posisi pada Lengan Robot Pemindah Barang Berbasis Mikrokontroller ATMega16. In Proseding Seminar Nasional Sains dan Teknologi Terapan Institut Teknologi Adhi Tama Surabaya.

Technology, Ufactory. (2017). uArm Metal Developer Guide. Diakses 26 Desember 2018, dari https://www.ufactory.cc

Utomo, B., & Munadi. (2013). Analisis Forward dan Invers Kinematics pada Simulator Arm Robot 5 Derajat Kebebasan. Jurnal Teknik Mesin (S-1), 1(3), 11-20.

Wibowo, A. (2012). Nilai Ringkasan Data. Diakses dari Universitas Negeri Yogyakarta, http://staffnew.uny.ac.id

http://dx.doi.org/10.28989/avitec.v1i1.489

Article Metrics

Abstract view: 1627 times
Download     : 6707   times

This work is licensed under a Creative Commons Attribution 4.0 International License.

Refbacks

• There are currently no refbacks.