Prototipe Sistem Deteksi Jantung Manusia dan Lokasi Berbasis Internet of Things (IoT)

Abstract

The deaths caused by heart and blood vessel diseases reached 17.7 million people or 32.26 percent of total deaths in the world. The representation of heart health can be seen from the number of heart rate (HR) and oxygen saturation (SpO2). The purpose of this study is to determine the condition of the human body through the number of heartbeats and SpO2 using the MAX30100 sensor and to be able to find out the location of the patient via GPS Adafruit Ultimate Breakout. GPS calibration uses two calculation methods, namely using the Haversine formula and using the distance measurement feature on Google Earth. The method is then compared to get the difference between the coordinates obtained by the smartphone GPS as a reference with the patient's GPS. The HR measurement calibration on the MAX30100 sensor is then compared with the pulse on the wrist for accuracy.. The results of this study indicate the level of coordinate accuracy obtained by GPS Adafruit is not more than 5 meters. The average HR accuracy value is 98,23 percent and the SpO2 calibration results get an accuracy of 98,99 percent. The waiting time required for the GPS to receive coordinates from the satellite with the GPS condition uncovered by the casing is about 7 to 13 minutes, while when the casing is closed the GPS cannot get the coordinates. MAX30100 can work optimally and obtain accurate values when the patient is in a relaxed position and does not do too much movement.

Keywords

GPS Adafruit, Heart Rate, SpO2

Full Text:

PDF

References

Wildian, & Mardiansyah. (2019). Rancang Bangun Alat Monitoring Detak Jantung Pasien Rumah Sakit dengan Sistem Telemetri Berbasis Ardiuno UNO R3. Jurnal Fisika Unand, 8(4), 355–361.

Qahar, A. N. (2018). Desain Alat Ukur Denyut Jantung Dan Saturasi Oksigen Pada Anak Menggunakan Satu Sensor. Universitas Islam Indonesia

R, A., Nigli, K. S., & P, M. K. (2020). Patient Health Monitoring System Based on IOT. UGC Care Journal, 40(60), 2553–2561.

Anggris, M. F., Ananta, M. T., & Az-zahra, H. M. (2018). Rancang Bangun Aplikasi Augmented Reality Pengelolaan Rambu-Rambu Lalu Lintas Menggunakan Global Positioning System ( GPS ) pada Android. Jurnal Pengembangan Teknologi Informasi dan Ilmu Komputer (J-PTIIK) Universitas Brawijaya, 2(8), 2892–2901.

Sulistyo, A., Yudhana, A., Sunardi, & Aini, R. (2019). Kombinasi Teknologi Aplikasi GPS Mobile dan Pemetaan SIG dalam Sistem Pemantauan Demam Berdarah ( DBD ). Khazanah Informatika, 5(1), 6–14.

Yunidwianggraeni, Irawan, B., & Saputra, R. E. (2017). Perancangan Alat Pendeteksi Denyut Nadi Pada Korban Bencana Alam Menggunakan Teknologi Jaringan Sensor Nikabel. E-Proceeding of Engineering: 4(3), 4083–4090.

Pandhita, A. L., & Yuliansyah, H. (2016). Rancang Bangun Aplikasi Android Berbasis Lokasi Untuk Pencarian Distribution Point. JURNAL INFOTEL - Informatika Telekomunikasi Elektronika, 7(2), 83–92.

Oklilas, A. F., Siswanti, S. D., & Rachman, M. D. (2017). Akurasi Pembacaan GPS Pada Android Untuk Location Based Service (Studi Kasus: Informasi Lokasi SMA di Palembang). Jurnal Ilmu Komputer dan Agri-Informatika, 4(1), 1.

Prastowo, P. T., Satoto, K. I., & Isnanto, R. (2012). Perancangan Aplikasi Pencari Masjid Menggunakan Global Positioning System (GPS) Pada Platform Android. TRANSIENT, 1, 5.

Putri, D. I. K. (2015). Visualisasi dan Sinkronisasi data GPS Tracker Berbasis SMS Gateway. Institut Teknologi Sepuluh November.

http://dx.doi.org/10.28989/avitec.v3i1.914

Article Metrics

Abstract view: 449 times
Download     : 400   times

This work is licensed under a Creative Commons Attribution 4.0 International License.

Refbacks

• There are currently no refbacks.