PULL AND BENDING FORCE USING FIBERGLASS WR EPOXY COMPOSITE MATERIALS AND FIBER CARBON EPOXY

Abstract

Bending testing is carried out in the lab. Nurtanio Adisutjipto College of Technology Yogyakarta uses the Gotech Testing Machine INC (Universal Testing Machine) UTM testing machine where the results obtained in the test are in the form of a graphic in which the maximum load value, elastic modulus, area, yield point and span have been obtained. From the results of these tests, we can compare the average value of the maximum load and the modulus of elasticity received in each specimen with variations in carbon fiber and WR fiberglass.

Keywords

INC, Fiber, bending and UTM

Full Text:

PDF

References

ASTM D3039 Standard Test Method For Tensile Properties Of Polymer Matrix Composite Materials.

ASTM D7264 Standard Test Method For Flexural Properties Of Polymer Matrix Composite Materials.

Andy Lennon, 2002, R/C Model Aircraft Design Practical Techniques For Building Better Models, United State Of America.

Groover, Mikell. P, Fundamentals Of Modern Manufacturing: Materials, Processes And System, 3rd Edition, United States Of America.

[Daniel P. Raymer, Aicraft Design: A Conceptual Approach, American Institute Of Aeronautics, Inc., 370 L’enfant Promenade, S.W., Washington, D.C.

Jay Gundlach, Deigning Unmanned Aircraft Systems: A Comprehensive Approach, Aurora Flight Sciences, Manassas Virginia.

Wisnu Wardana, 2018, Proses Manufaktur Pada Pesawat UAV V-Sky 14, Sekolah Tinggi Teknologi Adisutjipto, D.I. Yogyakarta.

Burhanudin Rohani, 2016, Proses Produksi Prototipe Pesawat Platform Unmanned Aerial Vehicle (UAV) Sky King, Sekolah Tinggi Teknologi Adisutjipto, D.I. Yogyakarta.

Brillian Indra Wibowo, 2019, Analisis Proses Penggabungan Komposit Menggunakan Adhesive Bonding Beserta Kekuatannya Terhadap Uji Tarik, Sekolah Tinggi Teknologi Adisutjipto, D.I.Yogyakarta.

Arifin Mulia, 2016, Rancang Bangun Dan Analisa System Kendali Pid Pada Unmanned Aerial Vehicle (UAV) Fixed Wing, Jurusan Teknik Mesin, Fakultas Teknologi Industri, Institut Teknologi Sepuluh Nopember, Surabaya.

Juliono S, Ikhwansyah I, Syahrul A, M. Sabri, Tugiman, Mahadi, 2016, Pembuatan Dan Analisis Gaya Badan Pesawat Tanpa Awak Dari Bahan Material Komposit Yang Diperkuat Polyester Dan Serat Rock Wool Dengan Metode Hand Lay Up, Departemen Teknik Mesin, Fakultas Teknik, Universitas Sumatera Utara, Sumatera Utara

http://dx.doi.org/10.28989/vortex.v2i1.896

Article Metrics

Abstract view: 252 times
Download     : 357   times

This work is licensed under a Creative Commons Attribution 4.0 International License.

Refbacks

• There are currently no refbacks.