ANALISIS BENDING PADA KOMPOSIT SERAT ALAM DAUN AGEL DENGAN RESIN EPOXY

Abstract

The use of composite materials, especially those developed by natural fibers in various equipment, has begun to develop a lot, the use of natural agel leaf fibers as composite materials can reduce the use of synthetic materials and increase the utilization of agel leaf natural fibers which are still a lot of wasted. This study aims to determine the stages or processes of agel leaf natural fiber composite using 2 methods of hand lay up, vacuum bag and to determine the value of the bending strength of agel leaf natural fiber material between variations of the epoxy matrix in the direction of the fibers 0^°  and 〖90〗^°.Based on the data from the test results, it can be concluded that the average value of maximum bending strength in agel leaf natural fiber composites using the vacuum bag manufacturing method with a volume fraction of 60% and fiber direction 0^°  and 〖90〗^° has an average maximum bending strength value that is the highest, namely 11.006 MPa and 11.057 MPa and the composite of agel leaf natural fiber using the hand lay up method (non vacuum bag) with a volume fraction of 50%, 60%, 70% and fiber direction 0^° has the lowest average maximum bending strength values of 3.413 MPa, 5.404 MPa, 4.625 MPa.

Keywords

Agel, Leaf, Vacuum Bag, Bending Test

Full Text:

PDF Plagiarism check

References

ASTM. D7264. Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials.

MUHAMAD SYAHRUL RAMADHAN (2021), Mahasiswa Institut Teknologi Dirgantara Adisutjipto Yogyakarta dengan judul ANALISIS KEKUATAN TARIK MATERIAL KOMPOSIT SERAT ALAM DAUN AGEL MENGGUNAKAN VARIASI MATRIKS RESIN EPOXY DAN POLYESTER DENGAN ORIENTASI ARAH SERAT 0^° dan 〖90〗^°

PRAMUDA NAUFAL MUBARAK (2020), Mahasiswa Institut Teknologi Dirgantara Adisutjipto Yogyakarta dengan judul ANALISIS KEKUATAN DAN BENDING KOMPOSIT SERAT DAUN PANDAN LAUT DENGAN ARAH ORIENTASI SERAT 0^° dan 〖90〗^° DAN MATRIK RESIN EPOXY

BRILLIAN INDRA WIBOWO (2019), Mahasiswa Institut Teknologi Dirgantara Adisutjipto Yogyakarta dengan judul ANALISIS PROSES PENGGABUNGAN KOMPOSIT MENGGUNAKAN ADHESIVE BONDING BESERTA KEKUATANNYA TERHADAP UJI TARIK

https://www.detik.com/bali/berita/d-6407981/rumus-standar-deviasi-pengertian-fungsi-jenis-dan-contoh

https://www.dosenmatematika.co.id/koefisien-variasi/
https://media.neliti.com/media/publications/58662-ID-analisa-kekuatan-bending-komposit-epoxy

http://staffnew.uny.ac.id/upload/132319413/pengabdian/artikel-ibm-serat-agel.pdf

https://rumusrumus.com/massa-jenis-air/

https://materibelajar.co.id/pengertian-matriks/

http://ejournal.kemenperin.go.id/dkb/article/view/970

http://eprints.polsri.ac.id/1908/3/3.%20BAB%202.pdf

http://dx.doi.org/10.28989/vortex.v4i2.1696

Article Metrics

Abstract view: 192 times
Download     : 122   times Download     : 1   times

This work is licensed under a Creative Commons Attribution 4.0 International License.

Refbacks

• There are currently no refbacks.