Sterilizer chamber design with telegram-based internet of things (IoT) applications

Nurwijayanti Kusumaningrum, Reza Ananda

Submitted : 2021-11-10, Published : 2021-11-30.

Abstract

In order to reduce the spread of the corona virus in office areas, malls or housing, a sterilizer chamber is installed. It is used to detect someone who will enter an area and he must be sterilized first by spraying the entire body with disinfectant liquid automatically. By combining the sterilizer chamber tool with IoT technology, the sterilizer chamber tool can be monitored continuously at a certain distance using a sensor as a detector which will provide information to one of the operators of the tool condition, about the remaining liquid, the number of people who have been sterilized. The system works by providing information on the liquid spray time of about 5 seconds and information on the liquid level in the tube from level 5-70. The average output pin voltage is 4.89 V when the sensor detects an obstacle in front of the sensor and the NODEMCU will receive a voltage 4.89 V from the output pin and ultrasonic sensor HC-SR04. The highest voltage reaches 673.2 Mv, when the distance to the object is 40 cm with the lowest voltage is 100.3 mV with the closest distance being 5 cm.

Keywords

Internet of Things Telegram Cairan Disinfektan Sterilizer Chamber Virus Corona

Full Text:

PDF

References

Nurul Hidayah Nasution, Arinil Hidayah, Khoirunnisa Mardiah Sari, Wirda Cahyati, Mar’atun Khoiriyah, and Riska Putriana Hasibuan, “GAMBARAN PENGETAHUAN MASYARAKAT TENTANG PENCEGAHAN COVID-19 DI KECAMATAN PADANGSIDIMPUANBATUNADUA, KOTA PADANGSIDIMPUAN,” Jurnal Kesehatan Ilmiah Indonesia, vol. 6, no. 1, pp. 107–114, 2021.

O. L. Nuryanti, A. Primasuari, L. M. Putri, and A. E. Bakti, “EFEKTIFITAS DISINFEKTAN ALAMI SEBAGAI UPAYA PREVENTIF PENYEBARAN VIRUS COVID-19.”

M. Adi Surya Antara, I. Wayan Arsa Suteja, A. Prabowo, P. Nasional Denpasar dan Jalan Pandu No, and D. -Bali, “STERILIZER CHAMBER SEBAGAI SALAH SATU ALAT PENCEGAHAN PENYEBARAN VIRUS COVID-19.”

Nurwijayanti. KN and R. Eka Adhytyas, “Garbage Bin Monitoring System Based on the Internet of Things at University Dirgantara Marsekal Suryadarma,” International Journal of Education and Management Engineering, vol. 11, no. 2, pp. 1–12, Apr. 2021, doi: 10.5815/ijeme.2021.02.01.

D. Pramanda and Aswardi, “JTEV (JURNAL TEKNIK ELEKTRO DAN VOKASIONAL) Sistem Kendali Kecepatan Motor DC Berbasis Arduino dengan Metode Open Loop,” JURNAL TEKNIK ELEKTRO DAN VOKASIONAL, vol. 6, no. 1, pp. 187–198, 2020, [Online]. Available: http://ejournal.unp.ac.id/index.php/jtev/index

Marzuarman, Abdul Hadi, and Jefri Lianda, “BILIK DISINFEKTAN BERBASIS OZON (TANPA CAIRAN KIMIA) SEBAGAI UPAYA PENCEGAHAN PENULARAN COVID-19 DI LINGKUNGAN UPT PUSKESMAS DESA PEMATANG DUKU BENGKALIS,” 2020.

D. A. Aziz and D. Abdulahad Aziz, “Webserver Based Smart Monitoring System Using ESP8266 Node MCU Module,” 2018. [Online]. Available: www.ijser.org

F.- Puspasari, I.- Fahrurrozi, T. P. Satya, G.- Setyawan, M. R. al Fauzan, and E. M. D. Admoko, “Sensor Ultrasonik HCSR04 Berbasis Arduino Due Untuk Sistem Monitoring Ketinggian,” Jurnal Fisika dan Aplikasinya, vol. 15, no. 2, p. 36, Jun. 2019, doi: 10.12962/j24604682.v15i2.4393.

R. Paradila and M. Arifin, Pengujian Rancangan Sistem Cuci Tangan Tanpa Sentuh Dengan Memanfaatkan E18-D80NK Infrared Proximity Sensor dan Solenoid Valve, vol. 6. 2020.

Olivia M. Sinaulan, Yaulie D. Y. Rindengan, and Brave A. Sugiarso, “Perancangan Alat Ukur Kecepatan Kendaraan Menggunakan ATMega 16,” E-Journal Teknik Elektro dan Komputer, pp. 60–70, 2015.

B. Boru, H. Siahaan, S. Rizqika Akbar, and D. Syauqy, “Implementasi Modul Antarmuka Perangkat Sensor Dan Komunikasi Pada UART Dan I2C Dengan Fitur Plug And Play,” 2018. [Online]. Available: http://j-ptiik.ub.ac.id

D. Auliya Saputra, N. Utami, and R. Setiawan, “RANCANG BANGUN ALAT PEMBERI PAKAN IKAN MENGGUNAKAN MIKROKONTROLER,” 2020.

Yusniati, “Penggunaan Sensor Infrared Switching Pada Motor DC Satu Phasa,” 2018.

M. Artiyasa et al., “APLIKASI SMART HOME NODE MCU IOT UNTUK BLYNK,” 2020.

Article Metrics

Abstract view: 339 times
Download     : 246   times

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Refbacks

  • There are currently no refbacks.