The Progressive Development Of Multifunctional Composite Materials In Different Applications

Abstract

Composite materials gain huge interest from researchers due to its advantages and flexibility. Strength and properties that can be adjusted based on the needs and applications is a specific advantage of composite materials. Since these advantages can be applied in many fields, composite materials often clustered in multifunctional materials. This study aims to lists and classified the progressive development of multifunctional composite materials that found and already proven can be applied in many applications. This study also gives data that can be driven to readers from different backgrounds and used it for further purposes. The results are shown that the progressive development of multifunctional composite materials not only one step forward in the technical achievements but also the energy and environment-related to human ecosystems.

Keywords

Multifunctional materials; Composite; Coating; Nanomaterials.

Full Text:

PDF

References

Barbero EJ, editor. (2014). Multifunctional composites. vol. 104. CreateSpace.

Muflikhun MA, Yokozeki T, Aoki T. (2019). The strain performance of thin CFRP-SPCC hybrid laminates for automobile structures. Compos Struct, 220, 11–8. https://doi.org/10.1016/j.compstruct.03.094.

Das S, Yokozeki T. (2020). Polyaniline-based multifunctional glass fiber reinforced conductive composite for strain monitoring. Polym Test, 87, 106547. https://doi.org/10.1016/j.polymertesting.2020.106547.

Das S, Kumar V, Yokozeki T. (2019). Strain sensing behavior of multifunctional polyaniline-based thermoset polymer under static loading conditions. Polym Test 2019;77:105916. https://doi.org/10.1016/j.polymertesting, 105916.

Guadagno L, Naddeo C, Raimondo M, Barra G, Vertuccio L, Sorrentino A, et al. (2017). Development of self-healing multifunctional materials. Compos Part B Eng, 128, 30–8. https://doi.org/10.1016/j.compositesb.2017.07.003.

Arena M, Vertuccio L, Barra G, Viscardi M, Guadagno L. (2020). Damping assessment of new multifunctional epoxy resin for aerospace structures. Mater Today Proc 2020. https://doi.org/10.1016/j.matpr.2020.02.673.

Forintos N, Czigany T. (2019). Multifunctional application of carbon fiber reinforced polymer composites: Electrical properties of the reinforcing carbon fibers – A short review. Compos Part B Eng 2019;162:331–43. https://doi.org/10.1016/j.compositesb.2018.10.098.

Saba N, Jawaid M, Sultan MTH, Alothman O. (2017). Hybrid multifunctional composites-recent applications. Elsevier Ltd. https://doi.org/10.1016/B978-0-08-100785-3.00005-X.

Al-Lami A, Hilmer P, Sinapius M. (2018). Eco-efficiency assessment of manufacturing carbon fiber reinforced polymers (CFRP) in aerospace industry. Aerosp Sci Technol, 79, 669–78. https://doi.org/10.1016/j.ast.2018.06.020.

Kakichi Y, Yamaguchi A, Hashimoto T, Urushisaki M, Sakaguchi T, Kawabe K, et al. (2017). Development of recyclable carbon fiber-reinforced plastics (CFRPs) with controlled degradability and stability using acetal linkage-containing epoxy resins. Polym J, 49, 851–9. https://doi.org/10.1038/pj.2017.68.

Zulkepli II, Mokhtar H, Aminanda Y, Shaik Dawood MSI, Rehan MSM. (2019). Review of Manufacturing Process for Good Quality of Composite Assessment. IOP Conf Ser Mater Sci Eng, 488. https://doi.org/10.1088/1757-899X/488/1/012008.

Zhang Z, Li Y, Yu X, Li X, Wu H, Wu H, et al. (2019). Bistable morphing composite structures: A review. Thin-Walled Struct, 142, 74–97. https://doi.org/10.1016/j.tws.2019.04.040.

Santos DG do., Carbas RJC, Marques EAS, da Silva LFM. (2019). Reinforcement of CFRP joints with fibre metal laminates and additional adhesive layers. Compos Part B Eng, 165:386–96. https://doi.org/10.1016/j.compositesb.2019.01.096.

Masouras A, Giannopoulos D, Hasa B, Katsaounis A, Kostopoulos V. (2019). Hybrid graphene nanoplatelet/manganese oxide electrodes for solid-state supercapacitors and application to carbon fiber composite multifunctional materials. J Energy Storage, 23, 515–25. https://doi.org/10.1016/j.est.2019.04.025.

Nguyen ATT, Amarasinghe CK, Brandt M, Feih S, Orifici AC. (2017). Loading, support and geometry effects for pin-reinforced hybrid metal-composite joints. Compos Part A Appl Sci Manuf, 98, 192–206. https://doi.org/10.1016/j.compositesa.2017.03.019.

Gbaguidi A, Namilae S, Kim D. (2017). Monte Carlo Model for Piezoresistivity of Hybrid Nanocomposites. J Eng Mater Technol, 140:011007. https://doi.org/10.1115/1.4037024.

Zhang K, Shi D, Wang W, Wang Q. (2017). Mechanical characterization of hybrid lattice-to-steel joint with pyramidal CFRP truss for marine application. Compos Struct, 160, 1198–204. https://doi.org/10.1016/j.compstruct.2016.11.005.

Muflikhun MA, Higuchi R, Yokozeki T, Aoki T. (2019). Failure mode analysis of CFRP-SPCC hybrid thin laminates under axial loading for structural applications : Experimental research on strain performance. Compos Part B Eng, 172, 262–70. https://doi.org/10.1016/j.compositesb.2019.05.049.

Barletta M, Rubino G, Tagliaferri V, Trovalusci F, Vesco S. (2014). Wood-reinforced polyphthalamide resins: Multifunctional composite coating for metal substrates. Int J Polym Sci, 2014. https://doi.org/10.1155/2014/494068.

Zhou Y, LaChance AM, Smith AT, Cheng H, Liu Q, Sun L. (2019). Strategic Design of Clay-Based Multifunctional Materials: From Natural Minerals to Nanostructured Membranes. Adv Funct Mater, 29, 1–18. https://doi.org/10.1002/adfm.201807611.

Gin DL, Noble RD. (2011). Designing the next generation of chemical separation membranes. Science (80- ), 332, 674–6.

Podsiadlo P, Kaushik AK, Arruda EM, Waas AM, Shim BS, Xu J, et al. (2007). Ultrastrong and stiff layered polymer nanocomposites. Science (80- ), 318, 80–3. https://doi.org/10.1126/science.1143176.

Zhao J, Zhao X, Jiang Z, Li Z, Fan X, Zhu J, et al. (2014). Biomimetic and bioinspired membranes: Preparation and application. Prog Polym Sci, 39, 1668–720. https://doi.org/10.1016/j.progpolymsci.2014.06.001.

Ed JPD. (2017). Green Composites: Materials Manufacturing and Engineering. vol. 8. https://doi.org/10.1017/CBO9781107415324.004.

Inamuddin, editor. (2016). Green Polymer Composites Technology. CRC press. https://doi.org/10.1201/9781315371184.

Ohsaki H, Kokubu Y. (1999). Global market and technology trends on coated glass for architectural, automotive and display applications. Thin Solid Films, 351, 1–7. https://doi.org/10.1016/S0040-6090(99)00147-9.

deRichter R, Caillol S. (2011). Fighting global warming: The potential of photocatalysis against CO2, CH4, N2O, CFCs, tropospheric O3, BC and other major contributors to climate change. J Photochem Photobiol C Photochem Rev, 12, 1–19. https://doi.org/10.1016/j.jphotochemrev.2011.05.002.

Le Quere C, Andres RJ, Boden T, Conway T, Houghton RA, House JI, et al. (2013). The global carbon budget 1959 – 2011. Earth Syst Sci Data, 5, 165–85. https://doi.org/10.5194/essd-5-165-2013.

Quéré C Le, Moriarty R, Andrew RM, Canadell JG, Sitch S, Korsbakken JI. (2015). Global Carbon Budget 2015. Earth Syst Sci Data, 7, 349–96. https://doi.org/10.5194/essd-7-349-2015.

Iqbal HMN, Kyazze G, Tron T, Keshavarz T. (2018). Laccase from Aspergillus niger: A novel tool to graft multifunctional materials of interests and their characterization. Saudi J Biol Sci, 25, 545–550. https://doi.org/10.1016/j.sjbs.2016.01.027.

Sheikh J, Teli MD. (2014). Bamboo Rayon-ZnO Nanoparticles Composite as Multifunctional Textile Materials. J Text, 2014, 1–5. https://doi.org/10.1155/2014/785159.

Wood RJK. (2015). Multifunctional materials for tribological applications. CRC press. https://doi.org/10.1201/b18311.

Lin Z, Ye M, Wang M, editors. (2018). Multifunctional Photocatalytic Materials for Energy. Elsevier B.V.

Siochi EJ, Harrison JS. (2015). Structural nanocomposites for aerospace applications. MRS Bull, 40, 829–35. https://doi.org/10.1557/mrs.2015.228.

Muflikhun MA, Higuchi R, Yokozeki T, Aoki T. (2020). Delamination behavior and energy release rate evaluation of CFRP/SPCC hybrid laminates under ENF test: Corrected with residual thermal stresses. Compos Struct. https://doi.org/10.1016/j.compstruct.2020.111890.

Muflikhun MA, Higuchi R, Yokozeki T, Aoki T. (2020). The evaluation of failure mode behavior of CFRP/Adhesive/SPCC hybrid thin laminates under axial and flexural loading for structural applications. Compos Part B Eng. https://doi.org/10.1016/j.compositesb.2020.107747.

Raguin VC. Revivals, (1990). Revivalists, and Architectural Stained Glass. J Soc Archit Hist, 49, 310–329. https://doi.org/10.2307/990521

Zhang X, Chen Y, Hu J. (2018). Recent advances in the development of aerospace materials. Prog Aerosp Sci, 97, 22–34. https://doi.org/10.1016/j.paerosci.2018.01.001.

Zhu L, Li N, Childs PRN. (2018). Light-weighting in aerospace component and system design. Propuls Power Res, 7, 103–19. https://doi.org/10.1016/j.jppr.2018.04.001.

Jagadish PR, Khalid M, Li LP, Hajibeigy MT, Amin N, Walvekar R, et al. (2018). Cost effective thermoelectric composites from recycled carbon fibre: From waste to energy. J Clean Prod, 195, 1015–25. https://doi.org/10.1016/j.jclepro.2018.05.238.

Hagnell MK, Langbeck B, Åkermo M. (2016). Cost efficiency, integration and assembly of a generic composite aeronautical wing box. Compos Struct, 152, 1014–23. https://doi.org/10.1016/j.compstruct.2016.06.032.

Flynn J, Amiri A, Ulven C. (2016). Hybridized carbon and flax fiber composites for tailored performance. Mater Des, 102, 21–9. https://doi.org/10.1016/j.matdes.2016.03.164.

Megahed M, Abo-bakr RM, Mohamed SA. (2020). Optimization of hybrid natural laminated composite beams for a minimum weight and cost design. Compos Struct, 239,111984. https://doi.org/10.1016/j.compstruct.2020.111984.

Nestler D, Trautmann M, Nendel S, Wagner G, Kroll L. (2016). Innovative hybrid laminates of aluminium alloy foils and fibre-reinforced thermoplastic layers. Materwiss Werksttech, 47, 1121–31. https://doi.org/10.1002/mawe.201600636.

Chan KY, Jia B, Lin H, Hameed N, Lee JH, Lau KT. (2018). A critical review on multifunctional composites as structural capacitors for energy storage. Compos Struct, 188, 126–42. https://doi.org/10.1016/j.compstruct.2017.12.072.

Cho DW, Yoon K, Ahn Y, Sun Y, Tsang DCW, Hou D, et al. (2019). Fabrication and environmental applications of multifunctional mixed metal-biochar composites (MMBC) from red mud and lignin wastes. J Hazard Mater, 374, 412–9. https://doi.org/10.1016/j.jhazmat.2019.04.071.

Nam KH, Kim K, Kim SG, Lee HS, Jung H, Yu J, et al. (2019). Sustainable production of reduced graphene oxide using elemental sulfur for multifunctional composites. Compos Part B Eng, 176, 107236. https://doi.org/10.1016/j.compositesb.2019.107236.

Rakesh P, Diwakar V, Venkatesh K, Savannananavar RN. (2019). A Concise Report on properties of Hybrid Composites manufactured from glass and natural fibers. Mater Today Proc, 22, 2008–15. https://doi.org/10.1016/j.matpr.2020.03.178.

Chegdani F, Takabi B, El Mansori M, Tai BL, Bukkapatnam STS. (2020). Effect of flax fiber orientation on machining behavior and surface finish of natural fiber reinforced polymer composites. J Manuf Process, 54, 337–46. https://doi.org/10.1016/j.jmapro.2020.03.025.

shariff M, Nagamadhu M, Jaiprakash M, Karthikeyan K, Kiran. (2020). Effect of drilling process parameters on natural fiber reinforced basket epoxy composites using grey relational analysis. Mater Today Proc, 24, 2255–64. https://doi.org/10.1016/j.matpr.2020.03.753.

Kerni L, Singh S, Patnaik A, Kumar N. (2020). A review on natural fiber reinforced composites. Mater Today Proc. https://doi.org/10.1016/j.matpr.2020.04.851.

Malviya RK, Singh RK, Purohit R, Sinha R. (2020). Natural fibre reinforced composite materials: Environmentally better life cycle assessment – A case study. Mater Today Proc, 26, 3157–60. https://doi.org/10.1016/j.matpr.2020.02.651.

Mehmandost N, Soriano ML, Lucena R, Goudarzi N, Chamjangali MA, Cardenas S. (2019). Recycled polystyrene-cotton composites, giving a second life to plastic residues for environmental remediation. J Environ Chem Eng, 7, 103424. https://doi.org/10.1016/j.jece.2019.103424.

http://dx.doi.org/10.28989/angkasa.v12i2.673

Article Metrics

Abstract view: 545 times
Download     : 260   times

This work is licensed under a Creative Commons Attribution 4.0 International License.

Refbacks

• There are currently no refbacks.