DC Motor Control Using Laboratory Virtual Instrumentation Engineering Workbench

Abstract

Motor has an important role in everyday life. Both are used on a home scale and in the industrial world. To regulate a motor, a good control system is needed. Laboratory Virtual Instrumentation Engineering Workbench abbreviated as LabVIEW is defined as a system engineering software that is used for the needs of testing, measuring, and controlling quickly on accessing hardware in which there is data needed. LabVIEW uses a graphics-based programming language or block diagram while other programming languages use a text base. This study aims to obtain a value of DC motor control. The method used in this research is to assemble the DC motor hardware with the driver followed by connecting it to a myRIO 1900 board controller. By providing variations in frequency and duty cycle, the results of current and voltage and rotation are obtained to determine its effect. The results of this study indicate that by giving a duty cycle of more than 50%, current and voltage are obtained and the motor rotation is linear and forms a horizontal line. The 100 Hz frequency is the best frequency that can produce the highest motor rotation.

Keywords

DC motor; control; LabVIEW

Full Text:

PDF (Bahasa Indonesia)

References

Artanto, D. (2017). Interface, Sensor, dan Aktuator Menggunakan Proteus, Arduino, dan LabVIEW. Yogyakarta: Deeppublish.

Andrianto, S. (2016). Sistem Pengendali Kecepatan Putaran Motor DC Berdasarkan PWM berbasis Arduino Mega. Palembang: Politeknik Negeri Sriiwjaya.

Arun, T. A., Arvin, S. K., & Madhukar, T. S. (2015). Microcontroller Based DC Motor Speed Control Using PWM Technique. Proceeding of The International Conference on Electrical, COmputer, and Telecomunication Engineering (ICECTE), (December 2012). Bangladesh.

Katke S.P, R. S. . (2015). Speed Control of DC Motor Using Microcontroler. International Journal of Advanced Technology in Engineering and Science, 02(12), 6.

Laksono, H. Di. (2015). Sistem Kendali dengan PID. Yogyakarta: Graha Ilmu.

Soelaiman, B. H. (2014). Pengendalian Motor DC Menggunakan Pulse Width Modulation (PWM).

Arifin, S., & Fathoni, A. (2014). Pemanfaatan Pulse Width Modulation untuk Mengantrol Motor (Studi Kasus Robot Otomatis Dua Deviana) DEVIANA ). Jurnal Ilmiah Teknologi Dan Informasi ASIA Malang, Stmik Asia Tinggi, Sekolah Informatika, Manajemen Malang, 8(2).

Artanto, D. (2012). Interaksi Arduino dan LabVIEW. Jakarta: PT.Elex Media Komputindo.

Baharuddin, Sadjad, R. S., & Tola, M. (2012). Sistem kendali Kecepatan Motor DC Berbasis PWM ( Pulse Width Modulation ). Universitas Hasanuddin.

Ogata, K. (1997). Modern Control Engineering. New Jersey, USA: Prentice-Hall.

Ogata, K. (1985). Teknik Kontrol Automatik (Sistem Pengaturan). Jakarta: PT Erlangga.

http://dx.doi.org/10.28989/angkasa.v12i2.571

Article Metrics

Abstract view: 350 times
Download     : 275   times

This work is licensed under a Creative Commons Attribution 4.0 International License.

Refbacks

• There are currently no refbacks.