ADDITION OF FLY ASH TO THE FIBER COMPOSITE GLASS ON COMPOSITE FUEL RESISTANCE PROPERTIES

Abstract

The process of making composites into several main stages, namely preparation of tools, cutting of specimens. Then the base (glass) is cleaned and coated with molding wax and PVA. Mix the resin with the addition of variations of fly ash 0%, 10%, 20% and 30%. Next, apply resin and glass fiber to the base (glass) for up to 3 layers then press it. After 12 hours remove the specimen and cut it to size

Keywords

composites; glass; specimen; layer

Full Text:

PDF

References

Annual Book of Standards, ASTM D 635-98 Standard, Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position. New York.

Annual Book of Standards, ASTM D 635-98 Standard 1994. UL 94 Klasifikasi Api. Underwriters Laboratories. Northbook, Illinois. USA.

Arismunanto, Vinsentius Bram. 2015. Sifat Tarik dan Ketahanan Bakar Komposit Serbuk Genteng Sokka, Phenolic, dan Serat Gelas [tesis]. Surakarta (ID) : Universitas Sebelas Maret.

Brilian Indra Wibowo. 2019. Analisis Proses Penggabungan Komposit Menggunakan Adhesive bonding Beserta Kekuatannya Terhadap Uji Tarik [skripsi]. Yogyakarta (ID) : Sekolah Tinggi Teknologi Adisutjipto.

Diharjo, Kuncoro, Bambang Kusharjanta, Roy Aries P Tarigan, Albert Raga Andhika. 2013. Pengaruh Kandungan Dan Ukuran Serbuk Genteng Sokka Terhadap Ketahanan Bakar Komposit Geopolimer. Jurnal Rekayasa Mesin Vol.4, No.1 Tahun 2013 27-34

Diharjo, Kuncoro, dkk. 2012. Sifat Tahan Api dan Kekuatan Bending Komposit Geopolimer : Analisis Pemilihan Jenis Partikel Geomaterial. Universitas Sebelas Maret.

Jones, Robert M. 1999. Mechanics of Composite Materials. Phiadelphia : Taylor & Francis Inc.

Jr, William D. Callister. 2007. Material Science and Enggineering, in Introduction. New York : John Wiley & Sons, Inc.

Karno, Ismanto Pusir, Yuyun Estriyanto, Danar Susilo Wijayanto. Pengaruh Jumlah Lapisan Terhadap Ketahanan Bakar Komposit Serat Kaca Bermatriks Ripoxy R-802 EX. Universitas Sebelas Maret.

Mitchell, Brian S. 2004. An Introduction to Materials Enggineering and Science for Chemical and Materials Enggineers. New Jersey : John Wiley & Sons, Inc.

Muhammad, Reza Putra. 2014. Bahan Ajar Bahan Teknik. Aceh : Fakultas Teknik Universitas Malikussaleh Jurusan Teknik Mesin.

Rusli. 2015. Pengaruh Variasi Fraksi Volume serbuk Kapur Terhadap Kekuatan Tarik dan Impak Pada Komposit Glass Fiber Reinforced Plastic (GFRP) Berpenguat Serat E-Glass Chop Strand Mat dan Matrik Resin Polyester [skripsi]. Yogyakarta (ID) : Sekolah Tinggi Teknologi Adisutjipto.

Sajjan, Sangamesh K., Vishwanath V.H. 2014. Effect of Fly Ash on Mechanical and Fire Properties of Fibre Glass Epoxy Composites. Mechanical Engineering Department, B.L.D.E.A’s V. P. Dr. P.G. H. CET, Vijayapura, India.

Sudhakara, P., Kannan, P., Obireddy, K., and Rajulu, A.V. (2011).

Organophosphorus and DGEBA Resins Containing Clay Nanocomposites:

Flame Retardant, Thermal, and Mechanical Properties, J. Mater Science

, 2778 – 2788

Surdia, Tata, Shinroku Saito. 1987. Pengetahuan Bahan Teknik. Jakarta : PT Pradnya Paramita

http://dx.doi.org/10.28989/vortex.v1i2.901

Article Metrics

Abstract view: 239 times
Download     : 393   times

This work is licensed under a Creative Commons Attribution 4.0 International License.

Refbacks

• There are currently no refbacks.