PENGARUH POSISI SHIELDED METAL ARC WELDING (SMAW) GERAK SPIRAL KAMPUH V TERHADAP KEKUATAN TARIK DAN STRUKTUR MIKRO BAJA KARBON RENDAH
Submitted : 2022-08-01, Published : 2023-01-19.
Abstract
The purpose of this study was to determine the relationship between the position of shielded metal arc welding (SMAW) with spiral motion V on the tensile strength and microstructure of low carbon steel. The research was conducted by welding V-coated low carbon steel with horizontal 2G, vertical 3G and overhead 4G. The test results show that the welding position does not have a significant effect on the tensile strength of low carbon steel welds, where the 3G vertical position provides a higher tensile strength value than the 2G horizontal position and 4G overhead. The microstructure of acicular ferrite (AF) in the vertical position looks dominant uniformly and tightly.
Keywords
SMAW; welding position; tensile strength
References
Sonawan, H., Suratman, R., (2004). “Pengantar Untuk Memahami Pengelasan Logam”, Alfa Beta, Bandung.
Wiryosumarto, H., (2000).”Teknologi Pengelasan Logam”, Erlangga, Jakarta.
Khan, M.I., (2007). “Welding Science and Technology”, New Age, New Delhi.
Alip, M., (1989). “Teori dan Praktik Las”, Departemen Pendidikan dan Kebudayaan.
Article Metrics
Abstract view: 180 times
Download : 176 times
Download : 1 times
This work is licensed under a Creative Commons Attribution 4.0 International License.
Refbacks
- There are currently no refbacks.