Design of the Cassava Slicing Machine Using the Pahl & Beitz Method (Case Study on a Chips MSME in Wonosobo, Central Java)

Abstract

The design of a cassava slicing machine using the Pahl & Beitz method serves as a solution to improve production capacity and work efficiency in a cassava chips MSME located in Wonosobo, Central Java. The manual cassava slicing process often requires a long time, increases the risk of injury, and produces non-uniform slices. The Pahl & Beitz method is applied through four main stages: task clarification, concept development, form design, and design evaluation. This study presents novelty in implementing a V-belt and pulley-based transmission system with a compact dimensional configuration adapted to the limited production space of MSMEs, as well as the use of type 304 stainless steel to ensure product hygiene and machine durability. Compared to conventional slicing machines, this design demonstrates an increase in capacity of up to 70 kg/hour, along with better energy efficiency and operator safety. This research is expected to serve as a reference for the development of appropriate technology to support MSMEs in the food processing sector, enhance competitiveness, and meet the growing market demand.

Keywords

Cassava Slicing Machine; Pahl & Beitz; MSMEs; Efficiency; Product Design

Full Text:

Article (Bahasa Indonesia) Plagiarism Check (Bahasa Indonesia)

References

S. Slamet, A. Ardiansyah, and M. Marwan, “Pengembangan Mesin Otomatis untuk Meningkatkan Produktivitas UMKM di Sektor Pengolahan Pangan,” J. Tek. Ind., vol. 12, no. 3, pp. 45–56, 2021.

E. F. Soeprapto and A. Wibisono, “Perancangan Mesin Pemotong Kain Upper Sandal yang Ergonomis Menggunakan Metode Pahl and Beitz,” in Prosiding Seminar Nasional Waluyo Jatmiko, 2023, pp. 121–130.

F. Frisiska, “Inovasi Pembuatan Risol dengan Kulit Risol Berbahan Dasar Singkong,” J. Pesona Hosp., vol. 15, no. 2, 2022.

E. A. Muhammad, “Analisis Kecepatan Putar (RPM) dan Waktu Pemotongan Singkong pada Mesin Perajang Singkong,” Universitas Nahdlatul Ulama Al Ghazali Cilacap, 2022.

D. Natasya, “Pengaruh Penambahan Serbuk Arang Aktif Ampas Kopi terhadap Permukaan Stainless Steel 304 dengan Variasi Temperatur Menggunakan Proses Pack Carburizing,” Universitas Malikussaleh, 2023.

S. S. Agung, “Penyebab Kerusakan Motor Listrik Penggerak Pompa Hidraulik Crane Saat Proses Bongkar Muat Di MV. Sinar Sejati,” Universitas Maritim AMNI (UNIMAR AMNI) Semarang, 2022.

S. Irfan, “Rancang Bangun Mesin Pond Pneumatik Untuk Home Industri,” Universitas Pasundan, 2023.

H. Heldiansyah, H. Gunawan, M. Suhaimi, M. Salim, and K. Yanuar, “Perancangan Awal Aplikasi Uji Sand Cone Kepadatan Lapangan Pekerjaan Tanah Berbasis Android,” J. Sci. Res. Dev., vol. 5, no. 2, pp. 1035–1045, 2023.

M. W. S. Guritno, M. Muhajir, and N. Saputra, “Penerapan Teknologi Mesin Pemotong Singkong untuk Meningkatkan Produktivitas UMKM di Dusun Miri, Polokarto, Sukoharjo,” J. Berdaya Mandiri, vol. 6, no. 2, pp. 90–97, 2024.

D. Rahmat, P. Rendy, and K. Mufidin, “Rancang Bangun Mesin Pencetak Pelet Pakan Ternak Sapi,” Politeknik Manufaktur Negeri Bangka Belitung, 2021.

E. M. Pratama, “Perancangan Mesin Pengiris Jahe,” E-Proceeding FTI, 2022.

A. R. Ramadhan, D. E. Septiyani, and H. Widiantoro, “Perancangan Mesin Pembuat Pelet Apung Berbahan Maggot Berkapasitas 20 Kg/Jam dengan Metode TRIZ,” in Prosiding Industrial Research Workshop and National Seminar, 2021, pp. 283–288.

D. P. Y. A. L. Sandopart et al., “Analisis Efisiensi Biaya Produksi pada Kegiatan Perusahaan Manufaktur dengan Teknologi Artificial Intelligence,” J. Akunt. Dan Manaj. Bisnis, vol. 3, no. 1, pp. 25–37, 2023.

B. Setiawan, “Change Processes Model dengan Pendekatan Sistematis dalam Proyek Konstruksi,” Community Dev. J. J. Pengabdi. Masy., vol. 5, no. 5, pp. 9633–9645, 2024.

M. A. R. Siregar, “Peningkatan Produktivitas Tanaman Padi melalui Penerapan Teknologi Pertanian Terkini,” OSF, 2023.

R. Dermawan, “Pengembangan Mesin Pengupas Kulit Kopi Menggunakan Metode VDI 2221,” Presisi, vol. 24, no. 2, pp. 54–63, 2022.

N. Y. S. Sarpong, J. O. Akowuah, E. A. Amoah, and J. O. Darko, “Enhancing Cassava Grater Design: A Customer-Driven Approach Using AHP, QFD, and TRIZ Integration,” Heliyon, vol. 10, no. 16, p. e36167, Aug. 2024, doi: 10.1016/j.heliyon.2024.e36167.

G. Li et al., “Research Progress on Mechanization Technology and Equipment for Cassava Field Production,” Agriculture, vol. 14, no. 11, p. 1926, Oct. 2024, doi: 10.3390/agriculture14111926.

N. Mohd Aripin, F. Mahmud, K. L. Lee, and S. Hussain, “Systematic Literature Review: Lean Ergonomics Analysis in Small & Medium Enterprises (SMEs) Manufacturing Sector,” J. Technol. Oper. Manag., vol. 19, no. 1, pp. 89–108, Jul. 2024, doi: 10.32890/jtom2024.19.1.7.

http://dx.doi.org/10.28989/jumantara.v5i1.2982

Article Metrics

Abstract view: 0 times
Download     : 0   times Download     : 0   times

This work is licensed under a Creative Commons Attribution 4.0 International License.

Refbacks

• There are currently no refbacks.