Application of Simple Additive Weighting Method for Decision Making for Scholarship Recipients at SMA Angkasa Adisutjipto Yogyakarta

Abstract

The SMA Angkasa Adisucipto Yogyakarta scholarship selection process requires an effective and objective approach to ensure that scholarships are awarded to students who meet the relevant criteria. The purpose of this study is to apply the Simple Weighting (SAW) method as a decision support in selecting scholarship recipients. The SAW technique was chosen because it allows for weighting calculations, allowing for a more systematic analysis of the criteria. The criteria used include student academic performance, attendance, behavior, and financial situation, each of which is weighted according to its importance. Eligible student data is processed using the SAW method to determine the final preference score, which is then used to rank prospective scholarship recipients. The results of the study indicate that the SAW method can make accurate and transparent decisions in selecting scholarship recipients. The application of the SAW method not only increases the efficiency of selection, but also reduces the subjectivity that occurs in the evaluation. In summary, the SAW method is very suitable as a decision-making tool based on various criteria, especially in selecting grant recipients.

Keywords

Simple Additive Weighting; Decision Support System; Scholarship Selection; Multicriteria

References

A. Mualim, D. B. Srisulistiowati, S. Rejeki, and S. Anggiani, “Developing Human Resource Management IN Increasing Sustainable Competitive Advantage IN SMAN 4 Bekasi Student,” JEMSI (Jurnal Ekonomi, Manajemen, dan Akuntansi), vol. 9, no. 6, pp. 2960–2970, 2023.

M. K. Budiarto, A. Rahman, and A. Efendi, “Proposing information and communication Technology (ICT)-Based Learning transformation to create competitive human resources: A theoretical review,” Multidisciplinary Reviews, vol. 7, no. 4, p. 2024076, 2024.

E. Sugiyarti, K. A. Jasmi, B. Basiron, M. Huda, K. Shankar, and A. Maseleno, “Decision support system of scholarship grantee selection using data mining,” International Journal of Pure and Applied Mathematics, vol. 119, no. 15, pp. 2239–2249, 2018.

L. A. Schell-Barber, Writing Centers between Past and Future: Outstanding Scholarship Award Texts and Student Success. Kent State University, 2020.

F. A. Syah, S. P. Hasugian, M. V. Adafmi, A. D. Sibarani, and L. Lisnawita, “The Implementation of the K-Means Clustering Algorithm for Awarding Scholarships to Outstanding Students,” ComniTech: Journal of Computational Intelligence and Informatics, vol. 1, no. 1, pp. 9–16, 2024.

R. Pradito and Y. Indrianingsih, “Analisis Perbandingan Metode Weighted Product (Wp) dengan Metode Simple Additive Weighting (Saw) untuk Pendukung Keputusan Pemilihan Biro Perjalanan Pariwisata,” Compiler, vol. 3, no. 2, 2014.

H. Agustian, A. S. Honggowibowo, and Y. Indrianingsih, “Sistem Pendukung Keputusanpemilihan Guru Teladan dengan Simple Additive Weighting Method (Saw)(Studi Kasus di SMA Angkasa Yogyakarta),” Compiler, vol. 1, no. 1, 2012.

A. Pujiastuti and F. Ardiansyah, “Decision Support System for The Weaning of Rex Rabbit Using Simple Additive Weighting (SAW) Method,” Compiler, vol. 8, no. 1, pp. 71–80, 2019.

A. W. Murdiyanto, “Decision support system of keyword selection web site using analytical hierarchy process (AHP) and simple additive weighting (SAW),” Compiler, vol. 8, no. 1, pp. 81–93, 2019.

A. Cahyapratama and R. Sarno, “Application of Analytic Hierarchy Process (AHP) and Simple Additive Weighting (SAW) methods in singer selection process,” in 2018 International Conference on Information and Communications Technology (ICOIACT), IEEE, 2018, pp. 234–239.

I. J. T. Situmeang, S. Hummairoh, S. M. Harahap, and M. Mesran, “Application of SAW (simple additive weighting) for the selection of campus ambassadors,” The IJICS (International Journal of Informatics and Computer Science), vol. 5, no. 1, pp. 21–28, 2021.

A. Ibrahim and R. A. Surya, “The implementation of simple additive weighting (SAW) method in decision support system for the best school selection in Jambi,” in Journal of Physics: Conference Series, IOP Publishing, 2019, p. 012054.

F. M. Jumaah, A. A. Zadain, B. B. Zaidan, A. K. Hamzah, and R. Bahbibi, “Decision-making solution based multi-measurement design parameter for optimization of GPS receiver tracking channels in static and dynamic real-time positioning multipath environment,” Measurement, vol. 118, pp. 83–95, 2018.

E. Filatovas, M. Marcozzi, L. Mostarda, and R. Paulavičius, “A MCDM-based framework for blockchain consensus protocol selection,” Expert Syst Appl, vol. 204, p. 117609, 2022.

O. Arslantaş, M. Gümüş, and E. H. Özder, “Scholarship recipient selection for higher education with AHP, SAW and TOPSIS,” Journal of Turkish Operations Management, vol. 7, no. 2, pp. 1685–1700, 2023.

E. Putra, S. Hidayatuloh, P. T. Nguyen, K. Sasmita, and M. C. Wibowo, “Decision support system for proposing scholarship recipients to best students using SAW,” International Journal of Control and Automation, vol. 13, no. 2, pp. 103–109, 2020.

G. T. Pranoto, D. Pebrianti, M. Darwis, and E. D. Krishnasari, “Selection of Education Assistance Recipients Based on AHP and SAW,” in 2022 International Seminar on Intelligent Technology and Its Applications (ISITIA), IEEE, 2022, pp. 163–168.

D. Holland, A. Krause, J. Provencher, and T. Seltzer, “Transparency tested: The influence of message features on public perceptions of organizational transparency,” Public Relat Rev, vol. 44, no. 2, pp. 256–264, 2018.

F. J. Rua, D. I. Inan, M. Sanglise, R. Juita, and L. Y. Baisa, “Application of the Simple Additive Weighting (SAW) Method in the Decision Support System for the Selection of Study Programs at the University of Papua,” G-Tech: Jurnal Teknologi Terapan, vol. 8, no. 4, pp. 2420–2430, 2024.

I. P. E. Sudarsana, “Credit Acceptance Decision Support System, a Comparison of Saw, Topsis, and Saw–Topsis Methods,” Jurnal Mantik, vol. 6, no. 1, pp. 502–511, 2022.

J. Susilo and E. G. Wahyuni, “Comparison of SAW and TOPSIS Methods in Decision Support Systems for Contraceptive Selection,” International Journal Software Engineering and Computer Science (IJSECS), vol. 4, no. 2, pp. 792–807, 2024.

V. M. M. Siregar et al., “Decision support system for selection of food aid recipients using SAW method,” in AIP Conference Proceedings, AIP Publishing, 2022.

G. T. Pranoto, I. Nawangsih, and E. Widodo, “Decision Support System Recommendation Housing Using AHP And Saw Method Palangka Raya City,” Journal of Applied Intelligent Systems (e-ISSN: 2502-9401| p-ISSN: 2503-0493), vol. 7, no. 3, pp. 223–236, 2022.

A. F. Hadi, R. Permana, and H. Syafwan, “Decision support system in determining structural position mutations using simple additive weighting (saw) method,” in Journal of Physics: Conference Series, IOP Publishing, 2019, p. 012015.

Y. Irawan, “Decision support system for employee bonus determination with web-based simple additive weighting (SAW) method in PT. Mayatama Solusindo,” Journal of Applied Engineering and Technological Science (JAETS), vol. 2, no. 1, pp. 7–13, 2020.

http://dx.doi.org/10.28989/compiler.v13i2.2660

Article Metrics

Abstract view: 1 times

This work is licensed under a Creative Commons Attribution 4.0 International License.

Refbacks

• There are currently no refbacks.