Perancangan Model Otomasi pada Industri Furnitur di Jepara Studi Kasus Produk Wood Cap

Abstract

The furniture industry in Jepara Regency, Central Java, is renowned for exporting high-quality products. One such product is the wood cap, which is used to cover the top of fences. The current manual production of wood caps results in a slow process. This research proposes an automation system to enhance efficiency, transforming the production process into two stages using an inclined plane, pushers, and a conveyor. This system integrates a block diagram, logic gates, a ladder diagram, and control devices, including limit switches, pressure switches, and an emergency button. The implementation of this automation allows orders to be completed in 50 days, significantly faster than the 150 days required by the manual system

References

[1] F. T. Putri, G. Luthfiansyah, R. T. Indrawati, B. Prasetyo, and S. Priyoatmojo, “Analisa Efek Otomatisasi Proses terhadap Kapasitas Produksi dengan Studi Kasus Mesin Selotip Semi Otomatis di Industri Pengemasan,” Jurnal Rekayasa Mesin, vol. 16, no. 2, pp. 286–297, 2021.

[2] D. Nimawat and A. Shrivastava, “Increasing productivity through automation,” European Journal of Advances in Engineering and Technology, vol. 3, no. 2, pp. 45–47, 2016.

[3] L. A. Hakim and R. A. Anugraha, “Perancangan Sistem Otomasi Untuk Kartu Tekstil Jacquard Pada Mesin Punching Untuk Di PT Buana Intan Gemilang,” Jurnal Rekayasa Sistem & Industri (JRSI), vol. 4, no. 01, pp. 68–75, 2017.

[4] A. Antoni and A. St, “Perancangan simulasi sistem pergerakan dengan pengontrolan pneumatik untuk mesin pengamplas kayu otomatis,” Jurnal rekayasa sriwijaya, vol. 18, no. 3, pp. 21–28, 2009.

[5] M. P. Groover, Automation, production systems, and computer-integrated manufacturing. Pearson Education India, 2016.

[6] L. Červený, R. Sloup, T. Červená, M. Riedl, and P. Palátová, “Industry 4.0 as an Opportunity and Challenge for the Furniture Industry—A Case Study,” Sustainability, vol. 14, no. 20, p. 13325, 2022.

[7] L. Wang, J. He, and S. Xu, “The application of industry 4.0 in customized furniture manufacturing industry,” in Matec web of conferences, EDP Sciences, 2017, p. 03022.

[8] G. J. Long, B. H. Lin, H. X. Cai, and G. Z. Nong, “Developing an artificial intelligence (AI) management system to improve product quality and production efficiency in furniture manufacture,” Procedia Comput Sci, vol. 166, pp. 486–490, 2020.

[9] D. Isman, “PERANCANGAN BOR KAYU OTOMATIS PADA PRODUKSI MEBEL DENGAN METODE PWM BERBASIS MIKROKONTROLER,” JOURNAL OF SCIENCE AND SOCIAL RESEARCH, vol. 3, no. 2, pp. 86–90, 2020.

[10] M. F. Rosid, K. R. T. P. Sari, and E. M. Indrawati, “Rancang bangun mesin pemotong kayu otomatis berbasis arduino,” Jurnal Nusantara of Engineering, vol. 4, no. 2, pp. 151–159, 2021.

[11] N. S. Widmer and R. J. Tocci, Digital systems: Principles and applications. Prentice Hall. Pearson Education International, 2007.

[12] D. H. Hanssen, Programmable logic controllers: a practical approach to IEC 61131-3 using CODESYS. John Wiley & Sons, 2015.

[13] R. Hutajulu, “Perancangan Dan Pembuatan Pintu Otomatis Pada Lemari Asam Menggunakan Limit Switch Dan Arduino Mega 2560,” Doctoral dissertation, Universitas Islam Riau, 2021.

[14] R. Djambiar, “Pengembangan Limit Switch Manual dan Otomatis Pada Mesin Fris,” SIGMA EPSILON-Buletin Ilmiah Teknologi Keselamatan Reaktor Nuklir, vol. 14, no. 3, 2010.

[15] I. Jonata, I. Abasana, and I. K. Parti, “Rancang Bangun Alat Sistem Kontrol Backwash Otomatis Sand Filter Menggunakan Solenoid Valve ,” Doctoral dissertation, Politeknik Negeri Bali, 2022.

[16] I. Hajar, D. J. Damiri, and M. T. B. Sitorus, “Penggunaan PLC dan HMI dalam Simulasi Kendali Ketinggian Air,” PROSIDING-SNEKTI, vol. 3, 2022.

[17] I. Arif, “Perancangan Unit Pengisian Pada Mesin Pengisian Botol Otomatis Berbasis PLC,” Jurnal Mesil (Mesin Elektro Sipil), vol. 3, no. 2, pp. 37–44, 2022.

[18] D. Aribowo, D. Desmira, and F. Puspitasari, “ANALISIS PERANCANGAN PROGRAM PLC SCHNEIDER TM221CE24R PADA SISTEM PEMINDAH BARANG OTOMATIS,” PROSISKO: Jurnal Pengembangan Riset dan Observasi Sistem Komputer, vol. 6, no. 1, 2019.

http://dx.doi.org/10.28989/angkasa.v16i2.2379

Article Metrics

Abstract view: 8 times

This work is licensed under a Creative Commons Attribution 4.0 International License.

Refbacks

• There are currently no refbacks.