MEMBANDINGKAN KINERJA MESIN BENSIN DUA LANGKAH SATU SILINDER PADA SEPEDA MOTOR MENGGUNAKAN VARIASI CAMPURAN BAHAN BAKAR MINYAK HASIL PROSES PIROLISIS SAMPAH PLASTIK DAN PREMIUM DENGAN PREMIUM MURNI

Wardoyo Wardoyo

Submitted : 2017-08-28, Published : .

Abstract

This research was aimed to know the performance of engine using variation of plastic waste pyrolysis and premium process result-gasoline fuel mix and pure premium and comparing with pure premium. The fuel mix variation used consisted of 20% plastic waste pyrolysis process result oil, 80% premium and 49%plastic waste pyrolysis process result oil, 60%premium. The research procedures included firstly the tested engine given pure premium fuel and the engine was run for 2-3 minutes by installing a transmission gear in 4th position, then rotation, torsion, power and specific fuel consumption was measured. Furthermore, the engine was stopped and the fuel was substituted with varied plastic waste pyrolysis process result oil mix, the engine was re-run. The measurement rotations, torsion, power and specific fuel construction was conducted by the same way with pure premium fuel testing. Out of test results for the same rotation of 5000-8000 engine RPM using fuel mix of 20% plastic waste pyrolysis process result oil the average power was 10.04 HP, average torsion of 11.10 Nm, specific fuel consumption of 0.100 kg/hour HP and engine using fuel mix of 40% plastic waste pyrolysis process result oil the average power was 9.7 HP, average torsion of 10.82 NM, specific fuel consumption o f 0.068 kg/hour HP. While using pure premium the average power was 9.8 HP, average torsion of 10.94 Nm, specific fuel consumption was 0.103 kg/hour HP. If compared, so that engine performance using fuel mix of 40% plastic waste pyrolysis process result oil and 60% premium almost approached engine performance using pure premium fuel and actually 20% fuel mix of plastic waste pyrolysis process result oil and 80% premium was better.

Keywords

Gasoline two cylinder engine performance, Plastic waste pyrolysis process result oil

References

Agustriana, Vera. 201 l. Alat ukur dan ketelitian. http://mototech.co.idlindexphp?action=store.showCat&cat_id=39. Diakses tanggal 25 maret 2015 pukul 16.21 WIB.

Andyana, LW. Bandem. 2013. Sistem Penyaluran Bahan Bakar (Fuel System).http://web.ipb.acAd/~tepfteta/eleammg/media/Bahan%20Ajar%20Motor%20dan%20Tenaga%2 0Pertanian/P%20gatot/Sistem%20BBYo20&%20Pelumasan%20-%20NEW.htm. Diakses 3 maret 2015.

Arismunandar, Wiranto. 1983. PenggerakMula Motor Bakar Torak. Penerbit ITB. Bandung, hal: 4-30.

Aydinli, B., Caglar, A. 2013. The comparison of hazelnut shell co-pyrolysis with polyethylene oxide and previous ultra-high molecular weight polyethylene. Journal of Analytical and Applied Pyrolysis, 87 (2):263-268

Besier S. and Williams T.P. 1996. The Influence of Temperature and Heating Rate on The Slow Pyrolysis of Biomass. Journal Renewable Energy, 7(3): 223-317.

Dirjen migas. 2006. Kep. Direktur Jenderal Minyak dan gas bumi No. SK Dirjen Migas No.3674 KJ24/DJM/2006.

Handoko, Tri. 2011. Mengubah Limbah Plastik Jadi Bahan Bakar Minyak Https://indonesiaproud.wordpress.com/20n/12/01/tri-handoko-mengubah-limbahplastikjadi-bahan-bakar-minyak! Diakses tanggal 3 maret 2015.

Hastuti, Dyah Woro. 2013. Konsep reaksi pembakaran. http://eprints.undip.ac.idI41619/3/BAB II.pdf. Diakses tanggal 1 maret 2015.

Irfan, Ahmad. 2013. Teori Dasar Motor Bakar. http://abangirfan62.blogspot.com/2013/06/teoridasar-motor-bakar.html. Diakses tanggal 5 maret 2015.

Johnson, Matthew and Sean Derrick. 2013. Pyrolysis: A method for Mixed Polymer Recycling. Micighan, Western Micighan University. Pp. 4-18.

Kumar S., Panda, A.K., dan Singh, R.K.. 2011. A Review on Tertiary Recycling of High-Density Polyethylene to Fuel. Resources, Conservation and Recycling , 55: 893- 910.

Lesmana, Faizal. 2014. Sistem Pengapian (Ignition System).http://zallesmana.blogspot.com/p/sistem pengapian-ignition-system.html. Diakses tanggal 4 maret 2015.

Article Metrics

Abstract view: 692 times
Download     : 491   times

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Refbacks

  • There are currently no refbacks.